Material 17-7PH Cold Rolled Stainless Steel Sheet SUS631 Strip In
Coil
Precipitation Hardening (PH) stainless steels are classified as
martensitic or semi-austenitic.
They develop their high strength and hardness through a variety of
heat treatments resulting in a
very high strength-to-weight ratio.
Semi-austenitic grades are 17-7PH and PH 15-7 Mo.
They are austenitic in the annealed state, and martensitic in the
hardened condition.
Martensitic grades include 17-4PH and 15-5PH. The PH grades achieve high tensile
properties in heat treated conditions.
Applications for PH steels include aerospace components, flat
springs, and retaining rings.
17-7 PH is a precipitation hardening semi-austenitic stainless
steel.
It is able to develop a very high strength due to the strengthening
of aluminium particles.
It is usually found in strip or wire form for spring applications.
Grade
| AISI/UNS | EN/DIN | JIS | GB |
17-7PH S17700 | 1.4568 X7CrNiAl17-7 | SUS631 | 0Cr17Ni7Al 07Cr17Ni7Al |
Composition %
| C | Si | Mn | P | S | Cr | Ni | Al |
| 0.09 max | 1.00 max | 1.00 max | 0.040 max | 0.030 max | 16.00~18.00 | 6.5~7.75 | 0.75~1.50 |
17-7PH stainless grade combines the following characteristics:
- Good corrosion resistance better than 17-4 PH close to that of 304
- Very high strength up to 1700 MPa minimum UTS in EN 10151 or 1655
MPa minimum in ASTM A693
- Excellent fatigue strength
- Low distortion in heat treatment
- Weldable with matching consumables
17-7 PH provides a combination of very high strength and moderate
corrosion resistance.
Its metallurgy is complex involving several stages of processing to
develop the necessary microstructure.
The highest level of strength is achieved by cold working to
produce martensite followed by an ageing treatment at about 480°C.
This restricts the use of the grade to thin sheet and wire
products.
Other heat treatment conditions are also available to produce
softer and more ductile material.
Applications which illustrate these features include:
Springs, Belleville washers, aerospace, orthodontic wire, strain
gauge, load cell, pressure transducer.
For Details, please Contact
WUXI GUANGLU Special Steel Co., Ltd.
Stainless martensitic • precipitation hardening steel • stainless
ferritic — Our answer to your needs
Tel: +86 510 81812873
Email: export@guanglusteel.com
